07.06.2020»»воскресенье

cabal.netlify.com

Download Standard Sata Ahci Controller Driver Serial

07.06.2020
    44 - Comments

Nov. 06, 2018 / Updated by Bessie Shaw to Windows Driver Solutions

SATA AHCI driver is crucial if you want to install Windows in AHCI mode instead of IDE. AHCI (Advanced Host Controller Interface) makes NCQ (Native Command Queuing) as well as hot-plugging or hot swapping through SATA (Serial ATA) host controllers possible. Before you enable AHCI mode in BIOS/UEFI, make sure you’ve download and install correct AHCI driver.

How to Download and Install SATA AHCI Driver on Windows OS

If you are not sure whether there is SATA AHCI driver installed, or if you encounter driver problems when installing the AHCI driver, don’t worry. This tutorial will show you how to download and install the SATA ACHI driver.

This package installs the software (Intel SATA Controller AHCI Driver) to enable the following device. Device Name ----- Standard SATA AHCI Controller Device name in the Device Manager ----- Intel(R) 7 Series Chipset Family SATA AHCI Controller. Download the Standard SATA AHCI controller driver for Windows 10. Difference Between SATA and AHCI? The full form of SATA is Serial ATA interface, it operates on AHCI and IDE and it performs at high data speed.

Way 1: Download and Install SATA AHCI Driver Manually

1. Download the AHCI driver from the Internet.

For example, if you are going to install Asus AHCI driver for windows 10, you can go to the Asus support page and download the exact SATA AHCI driver you need. You can also download the driver elsewhere, but make sure the driver is digitally signed in case Windows 10 Anniversary driver signature issue occurs (if your Windows OS is a clean install of Windows 10 Anniversary).

Read More: How to Check Unsigned Drivers on Windows 10

2. Install the Driver

  • Home » Standard SATA AHCI Controller Use the links on this page to download the latest version of Standard SATA AHCI Controller drivers. All drivers available for download have been scanned by antivirus program.
  • You could download the latest version of Standard SATA AHCI Controller driver on this page. Please choose the proper driver according to your computer system.
  • Home » Standard SATA AHCI Controller Use the links on this page to download the latest version of Standard SATA AHCI Controller drivers. All drivers available for download have been scanned by antivirus program.
  • The Driver Update Tool – is a utility that contains more than 27 million official drivers for all hardware, including standard sata ahci-controller driver.

Use Windows shortcut keysWin + X to launch the Jump List and select Device Manager. And then expand the IDE ATA/ATAPI controllers entry. Navigate to your SATA AHCI controller, which is the device you are going to install the driver on. Right click on it and select Update Driver Software.

Click Browse my computer for driver software.

And then click Let me pick from a list of device drivers on my computer.

Kci and jojo this very moment mp3 download. It is illegal for you to distribute copyrighted files without permission. The media files you download with aio.how must be for time shifting, personal, private, non commercial use only and remove the files after listening. Aio.how is not responsible for third party website content.

Choose the model from the box, and then click Have disk.

Click Browse to locate the SATA AHCI driver file you’ve stored, and then click OK to install the driver.

After you finish the installation, restart the computer to make the driver take effect. Now you can enter the BIOS to enable the AHCI mode.

Way 2: Download and Install SATA AHCI Driver Automatically

Download SATA AHCI driver manually is time-consuming and if you install the driver in an incorrect way, serious PC problems like random restarts, INACCESSIBLE_BOOT_DEVICE error on Windows 10, 100% disk usage, etc. may occur suddenly.

If you want to download and update SATA AHCI driver easily, try the all in one driver update utility, Driver Talent, then you can download and install the driver one time and fix the AHCI driver problem easily.


Just click the button above to get it directly and follow the steps below to install the SATA driver quickly.

1. Do a Free Scan for Your Computer

Click Scan to detect whether there exist missing or incorrect configured AHCI driver.

2. Download and Install the Driver in One Click

Click Update to download proper AHCI driver for Windows. Or click Repair to fix the driver problem instantly.

3. Restart the PC

Don’t forget to reboot to make the driver changes take effect.

Note:

1. Remember to back up drivers or create a system restore point before any system changes, or windows crashes will annoy you.

2.Below are parts of the SATA drivers for various brands of PCs, and you could click the links to download the drivers manually.

For more AHCI drivers, click here.

Hope this helped you install the SATA AHCI driver successfully and you finally can enable the AHCI mode in BIOS. If you have any other Windows issues, check for solutions in Resource Center in this site, or comment below directly please.

360 Total Security BusinessDriver Talent for Network Card
Deploy critical protection to secure your corporate dataDownload & Install Network Drivers without Internet Connection
30-day Free TrialFree Download
Please enable JavaScript to view the comments powered by Disqus.

All the storage drivers (Hard Disk) connected to your computer require a SATA AHCI Controller Driver. Without these drivers installed in Windows 10, you will start having issues while accessing the drives of your PC. And if the SATA AHCI drivers get corrupted or outdated, then you should update them right away. But since there are a lot of motherboards and processors out there, finding the correct driver for your storage drives can be a little difficult. Therefore today we are here with the full guide on Download Standard SATA AHCI Controller Drivers for Windows 10. You will also learn about the importance of these drivers in Windows 10 as well as how you can install them.

What is SATA?

SATA or Serial ATA stands for Serial Advanced Technology Attachment and is used with all modern storage drives. Chances are that the hard disk drives and solid state drives connected to your computer are using SATA. As of right now, most devices use the latest SATA 3 protocol for proper drive functions. Unlike IDE which uses parallel signaling, SATA uses serial signaling due to which the S in SATA stands for serial. Compared to older technology, SATA provides much faster speeds for file transfers.

What is AHCI?

AHCI stands for Advanced Host Controller Interface and it is responsible for providing communication between Windows 10 and SATA devices. It is essentially a protocol which is used by the AHCI SATA controller of your motherboard. You can enable the AHCI protocol via the UEFI BIOS of your computer which will switch all SATA devices to AHCI mode. AHCI allows you to hot-swap disk drives in your computer due to which you can remove or connect any SATA devices to your computer without turning it off. Before AHCI, this was not possible and every time you had to turn off your computer which was an issue for servers. Not only that but you also get faster access time with AHCI which makes Windows 10 more responsive while using a hard drive as your boot drive.

What is a SATA AHCI Controller?

SATA AHCI is basically a controller mode in the BIOS of your computer. As the name suggests, it basically controls all the storage drives of your computer with AHCI protocols. This means that if you are using SATA AHCI controller, you will be able to use all the features of AHCI mentioned above. Apart from that you also get Native Command Queuing which optimizes the operation of SSDs and HDDs in your computer being used at the same time. It also improves the transfer speeds for large data files.

Download Standard Sata Ahci Controller Driver Serial Download

What are IDE ATA/ATAPI Controllers in Windows 10?

IDE, which is commonly known as ATP, is an older technology for handling storage drives in the computer. It was used until all computer manufactures moved over to SATA AHCI which is much faster and better. IDE stands for Integrated Drive Electronics which was found in older storage drives. And ATA is the older name of PATA which stands for Parallel Advanced Technology Attachment. But since these protocols are older than AHCI SATA and have fewer features, IDE ATA/ATAPI is no longer used.

What is the Difference Between AHCI and IDE mode?

Some of you might be wondering about the differences between AHCI and IDE mode for Windows 10. And because of these differences, AHCI SATA is preferred over IDE ATA controllers due to which knowing the differences can be quite useful. The biggest difference between these two controller types is hot-swapping ability. Unlike IDE, AHCI allows you to replace disk drives without turning off the computer which is quite handy in servers.

Not only that but IDE lacks the support for native command queuing. This feature results in much faster speeds and increased response times for both HDDs and SSDs in the case of AHCI SATA controllers. Talking about physical differences, the SATA connector is quite small as compared to IDE connectors. The connector cable itself is also quite thin and flexible for the case of SATA. Overall, AHCI SATA is much better compared to IDE which is why all modern devices use SATA instead of ATA.

How to Find What SATA Mode is Being Used?

Thankfully to know what SATA controller mode is being used is possible right from Windows itself and doesn’t require rebooting and access BIOS settings. To know what SATA controller is being used on your system,

Download game gratis untuk komputer. Dapatkan Office 365 Personal: Excel, Word, PowerPoint, dan lainnya. Hanya dengan Rp87.999 per bulan. BELI SEKARANG >.

  1. Press Windows Key + X keyboard shortcut to launch Quick Menu
  2. Now to got Device Manager and open it
  3. Inside Device Manager, look for IDE ATA/ATAPI Controllers and expand it.
  4. That’s it, if you see Standard SATA AHCI Controller in the list that means your system is using AHCI mode.

How to Switch from SATA IDE to AHCI Mode?

In order to switch SATA mode from IDE to AHCI you will have to restart your Windows 10 PC. Do keep in mind that it is not recommended to switch SATA mode if you have already installed Windows 10. Doing so will result in INACCESSABLE_BOOT_DEVICE blue screen error. Only make a switch if you planning to install fresh Windows installation using bootable media.

  1. Restart your PC and press Delete key to enter into BIOS/UEFI settings.
  2. Inside BIOS/UEFI settings look for Advanced or Standard Configuration or Storage Configuration.
  3. You will see SATA configuration section or OnChip SATA Controller settings
  4. Click on “Configure SATA” or “SATA Type” and from the list select AHCI.
  5. Hit F10 key to save the settings to CMOS and let your system reboot.

Download Drivers for SATA AHCI Controller for Windows 10

By now you must know the importance of SATA AHCI Controllers in your computer. And the drivers for this controller are equally important as they provide communication between Windows 10 and the actual controller on your computer’s motherboard itself. Therefore, if due to some reason these drivers are either outdated or corrupted, you will start facing many issues. In such a case you have to update the SATA AHCI drivers in Windows 10.

Microsoft Standard Sata Ahci Driver

But before we proceed further to the update instructions, make sure to download the latest version of drivers in Windows 10. As there are a large number of motherboards and processors out there, finding the correct driver version for your computer can be a little difficult. Therefore, you can download the standard SATA AHCI controller drivers for either Intel or AMD on your Windows 10 PC from the download links mentioned below:

Standard SATA AHCI Controller drivers for Windows 10 AMD:

Latest Standard Sata Ahci Controller Driver

You can download the latest version of SATA drivers for your AMD computer from this download link. This driver can be highly useful if you are not able to find the correct drivers on your computer manufacturer’s website.

Standard Sata Ahci Controller Download

Standard SATA AHCI Controller drivers for Windows 10 Intel:

Similarly, if you have an Intel computer and want to update the AHCI driver, then you can get them from this download link. If you are not able to the latest driver online, then this driver will certainly work for you as it is the standard version.

How to Update Drivers for SATA AHCI Controller in Windows 10?

Now that you have downloaded the latest version of, you can go ahead and update the drivers. The whole process for updating the drivers is quite easy in Windows 10. Once you go through the download links, it will download an EXE file that you have to install like any other EXE file on your device. And once you have done that, the SATA AHCI driver in Windows 10 will be updated to the latest version.

Standard Sata Ahci Driver Download

Although, if this update method is not working for you, then you can also do it via the Device Manager in Windows 10. You can do this quite easily as shown in these steps:

Download Standard Sata Ahci Controller Driver Serial 7

  • Press Windows Key + X on your keyboard and select Device Manager.
  • In here, expand IDE ATA/ATAPI controllers which will show you the SATA controller in Windows 10.
  • After that, right-click on all of these one by one and select Update Driver.
  • Finally, a new window will open where you have to select Search automatically for updated driver software. Once you have selected this, Windows 10 will update the SATA AHCI drivers of your computer to the latest version using your internet connection.
 cabal.netlify.com © 2020